iBasso PB3

iBasso PB3

iBasso PB3 3.5mm/2.5mm Balanced Audiophile HiFi Portable Headphone Amplifier AMP

Description

Advantages of a Balanced AMP

  • The balanced amplifier output voltage is 2 times greater when compared to the output of a single ended amplifier.
  • Also, output power is 4 times more than the single ended amplifier which allows it to drive headphones better and win more headroom.

BTL structure with the patent balance circuit design.

  • Our balanced circuits are different from other balanced amp circuits. The general Balanced Earphone Amplifier will offset the second harmonic wave, resulting in no sound charm. Although amplifying the sound field is loud and dynamic is well, but the depth of sound field disappears and the human voice becomes thin. While our PB3 enhances the depth of the sound field under the conditions of keeping all advantages of a balanced amp, which makes the vocals become fuller.
  • The design of Op amp with buffer design ensures high current and high output power, and its maximum output power is up to 480mW.

The super capacitor optimization power supply.

  •  In the design of imitating audio products, the filter of the power is the most important.
  • The greater the capacity of the capacitor is, the better the intensity and resolution of the low-frequency.
  • We use 1 super capacitor of our product which is equivalent to 1000 pieces 470uF electrolytic capacitor, which perfectly solves the problem of the portable products without large capacitors. At the same time, the internal resistance of this super capacitor is very small, with faster response and better dynamic performance

Using C & C aluminum processing, ultra-thin body design.

Equipped with 2.5mm balanced interface and 3.5mm Non-balanced Earphone jack.

2-setting gain switch design

Imported Alps audio potentiometer.

2500mAh chloride ion battery with 20 hours long life.

Specifications

  • Output power: ≤ 480mW
  • Signal to noise ratio: ≥ 120dB
  • Total harmonic distortion: <0.0005%
  • Life time: 20H
  • Earphone adapter impedance: 8 ~ 300Ω
  • Size: 120 * 63 * 11.1mm
  • Weight: 135g


Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 5094
  • Brand: iBasso
  • Product Code: PB3
  • Availability: In Stock
  • $199.00

Available Options