FiiO Q5

Out Of Stock FiiO Q5 -

FiiO Q5 Bluetooth APTX DSD Dual AK4490EN DAC Headphone Amplifier for iPhone /Android/Sony/Computer

Specification

Weightabout 195g

Dimensionsbout 124mm x 64mm x 16mm

Audio Inputstandard 3.5mm Port (Shared Line / Coaxial/ Optical in)

Digital Coaxial Input Portstandard 3.5mm Port (Shared Line / Coaxial/ Optical in)

Digital/Optical Input Port:Standard 3.5mm Port (Shared Line / Coaxial/ Optical in)

USB Port:11-pin Micro USB at the bottom side,  for data exchanging and charging 5-pin Micro USB on the left side, for charging only by default(Can be interchanged via App)

Analog Input port(LO):Standard 3.5mm stereo jack

Headphone Output Port: Standard 3.5mm stereo jack

Balanced Output Port:2.5mm port

Recommended Headphone Impedance:16~150Ω(PO) ,16~300Ω(BAL)

Channel Balance:0.1 dB

Gain; Yes(High/Low)

Bass Boost: Up to 384kHz/32bit supported

Volume Control: Potentiometer(ADC Sampling)

Power SupplyDC5V 2A (Recommended)

Battery Capacity:3800 mAh

Charge Time:≤3.5 h DV5V 2AUSB port on the side

Battery Life:25 h (AUX IN) , 10h (OPT/COAX/USB/ Bluetooth IN)

Charging IndicatorRed light flashes when being charged,Red light goes off after fully charged

Low Battery Warning:Red light flashes twice every 3 seconds

BluetoothBluetooth 4.2, supports aptX, AAC, SBC

MFiYes

Sampling Rate Supported Up to 384kHz/32bitUSB IN92KHz/24bitCOAX IN96KHz/24bitOPT IN DSD SupportUSB INDSD64/128/256

Chips Used; DAC: AK4490EN * 2  , USB:  XMOS   XU208 ,   Bluetooth CSR8670 ,  LPFOPA1642×2Volume ICNJW1195  OP+AMPAD8620+OPA926

Line output specifications

THD+N :0.001% (1 kHz/10kΩ)

SNR :≥115 dB (A-weighted)

Frequency Response:5 Hz~90 kHz-3dB

Channel Separation:97 dB (1 kHz)

AM3A Headphone out specifications (3.5mm headphone out jack)

Output Power 1 ≥230 mW16Ω / THD+N1%)

Output Impedance 1.4Ω (32Ω loaded)

Output Power 2 ≥160 mW32Ω /THD+N1%)

Channel Separation ≥73 dB (1 kHzAUX IN)

Output Power 3 ≥24 mW300Ω / THD+N1%)

THD+N 0.001% (1 kHz

Frequency Response: 5 Hz~50 kHz-3dB

Peak Output Voltage 6 Vp-p

SNR:≥115 dB (A-weighted)

Max. Output Current:150mA (For reference)

Max. Input Level:3.8 Vrms

Balanced headphone out specifications (2.5mm TRRS headphone out jack)

Output Power 1 ≥470 mW16Ω / THD+N1%)

Output Impedance 2Ω (32Ω loaded)

Output Power 2 ≥440 mW32Ω /THD+N1%)

Channel Separation ≥99 dB (1 kHzAUX IN)

Output Power 3 ≥93 mW300Ω / THD+N1%)

THD+N 0.001% (1 kHz)

Frequency Response :5 Hz~50kHz-3dB

Peak Output Voltage:10.5 Vp-p

SNR ≥115 dB (A-weighted

Max. Output Current:150 mA (For reference)

Max. Input Level:3.8 Vrms

Package

Fiio Q5

Short and long Lightning-to-micro USB cables

3.5mm cable

2 x long straps

2 x short straps

Coaxial adapter

Optical adapter

Screwdriver

Non-slip silicone pad

Carrying pouch

FREE leather case

Shipping

  • Will ship via DHL/UPS/EMS/FEDEX
  • It is required to put your phone number on the parcel, please leave me your contact number when you pay.



Write a review

Note: HTML is not translated!
    Bad           Good

Free Shipping

All listed items will be shipped though Registered Airmail with tracking number if there is no extra shipping method option listed or shipping description in the product page.

Economy shipping: Will be shipped without tracking number.

Registered Airmail : Will be shipped via such as Hong Kong post , Deutsche Post , Netherlands Post , Singapore Post, you can leave us a message if you have any requirement about the shipping method .

It will be shipped via Hong Kong Post by default, Europe countries can choose to be shipped via Deutsche Post or Netherlands Post, it is also FREE, pls leave us a message if needed.

Express service: Will be shipped via DHL/EMS/UPS/FedEx

  • Views: 8837
  • Brand: FiiO
  • Product Code: Q5
  • Availability: Out Of Stock
  • $369.99

Available Options

Tags: FiiO Q5, FiiO Q5, Bluetooth