FiiO RC-SE1/SE1B

FiiO RC-SE1/SE1B - RC-SE1/SE1B

FiiO RC-SE1

  • Wire core: Silver plated copper, Outer skin, Teflon*FEP
  • Knitting structure with 8 separate wires
  • Independent ground wire for left and right channel
  • 11pcs of wire cores make up one separate wire (Single Wire core>φ0.08)

3.5mm stereo sound; Straight plug gold plated copper

  • High frequency audio head in coaxial style;φ2.4mm diameter gold plated copper

Outstanding tenslon-resistant

  • Strong aging-resistant against long time of usage

Available headphone models:

  • Shure se215/se315/se415/se515/se846
  • Westone um10/um20/um30/um40/um50
  • UE 900

FiiO RC-SE1B 2.5mm Replacement cable for Balanced earphones

Calling All Balanced Output Enthusiasts

  • Based on RC-SE1, the new RC-SE1B swaps the 3.5mm jack out for a 2.5mm 4-pole plug. With its separate Left/Right channel wires and separate +/- signal transfer, the RC-SE1B enables  balanced operation for your earphones. When connected to a balanced headphone amplifier (such as the FiiO AM3), RC-SE1B can greatly enhance channel separation as well as markedly increase the signal to noise ratio. This results in a wider sound stage and more controlled, textured bass-perfect for balanced output enthusiasts.

A Little Extra Transparency makes for A Lot More Individuality

  • From the plug joint, to the Y splitter, to the earphone-side connector, the new RC-SE1B is wrapped with transparent polycarbonate to separate itself from the unicolor cable. Not only does this striking visual element give your earphones some character, it naturally also invites you to take a closer look with its revealing view of the insides

Stunning Looks backed by Impressive Internals

  • The RC-SE1B adopts Teflon*FEP (fluorinated ethylene propylene) for the sheath and silver-plated copper as the conductor. 11 strands of silver-plated copper wires (each with a diameter>0.08mm) make up each of the 8 separate cables, which are all woven into one audio cable with separate wires for the Left/Right channels. Both the straight 2.5mm plug and the coaxial type MMCX connector (with a 2.4mm diameter) are made of gold-plated copper. These premium choices of materials ensure the RC-SE1B is a high quality cable that is highly elastic, tough against scrapes, and resistant to aging.
  • Conductor: Silver plated copper
  • Sheath: Teflon*FEP (fluorinated ethylene propylene)
  • Knitting structure with 8 separate wires
  • Separate Left/Right channels and ground wires for each channel.
  • 11 wire strands for each separate wire (individual strand diameter>0.08mm)

Boundless Compatibility

  • RC-SE1B not only is compatible with the Shure SE215/SE315/SE425/SE535/SE846, but also fits many other popular models including, but not limited to: the Westone UM10/UM20/UM30/UM50, the Ultimate Ears UE900/UE900S, and the JVC HA-FX850/HA-FX1200. This wide compatibility ensures the RC-SE1B can satisfy many listeners’ need for a unique yet stylish cable.

Specification

  • Length: 120cm (excluding the plug)
  • Diameter of  the conductor: 26 AWG(φ0.4mm)
  • Diameter of  the conductor with the outer skin: φ0.6mm
  • Diameter of  the wire: φ2.5mm
  • Impedance of single track for the wire: 0.16Ω(1.2m)
  • Suitable temperature: -80-200℃
  • Voltage resistance: 150V

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 4228
  • Brand: FiiO
  • Product Code: RC-SE1/SE1B
  • Availability: Out Of Stock
  • $31.90

Tags: FiiO RC-SE1/SE1B, FiiO RC-SE1 Wire core: Silver plated copper, Outer skin, Teflon*FEP Knitting structure with 8 separate wires Independent ground wire for le, RC-SE1/SE1B